 |
K4 Keyed Ignition Switch |
|
K4's Keyed ignition switch is a four position switch that is rated for 12 volts. It can handle 30 amps in ACC, 8 amps in IGN, and 20 amps in START. |
||
Part Number |
Description |
|
| KFE-16112 | ACC/OFF/IGN/START Keyed Ignition Switch, Stud Connectors | |
 |
Cole Hersee Sealed Keyed Ignition Switch |
|
Cole Hersee keyed ignition switch has a fully sealed contact area using O-rings and ultrasonic welding. It features an integral sealed Deutsch connector and an anti-restart option. It rating is 10 amps at 12 volts and 5 amps at 24 volts. |
||
Part Number |
Description |
|
| BSR-9506001 | ACC/OFF/IGN/START Sealed Keyed Ignition Switch | |
 |
K4 Sealed Progressive Switch |
|||
These sealed switches feature a progressive double pole switch with two 'ON' circuits. This allows you to run two circuits through one switch and be able to turn one or both on at the same time. The 221 series features a momentary ON2 which makes it ideal for a starter switch with ON1 being ignition and ON2 the starter. The 221 series is tripled sealed and are available with either tab or screw on terminals. |
||||
Part Number |
Description |
Volt |
AMP |
|
13-221 |
Off/On1/On2 Momentary Starter Switch w/ Tab |
12 |
20 |
|
13-221ST |
Off/On1/On2 Momentary Starter Switch w/ Screw |
12 |
20 |
|
 |
K4 Momentary Push Button |
|||
This switch is a OFF/Momentary ON push button that uses a spring to keep the switch in the OFF position when not being pressed. |
||||
Part Number
|
Description
|
Volt |
AMP |
|
KFE-15-100 |
Off/Momentary On Push Button |
12 |
60 |
|
 |
Cole Hersee Heavy Duty Momentary Push Button |
||
This switch is a heavy duty switch with a protective rubber cap. It is OFF/Momentary ON button that uses a spring to keep the switch in the OFF position when not being pressed. |
|||
Part Number
|
Description
|
Volt |
|
BSR-9245 |
Heavy Duty Off/Momentary On Push Button |
36 |
|
