3/4"-16 Right Hand Fine Thread Steel Silver Zinc Plated Thin Nyloc Jam Nuts
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
In offroad racing, it's common to have an issue with traditional jam nuts loosening up from vibration. Nylocs are a great solution for this problem. However you would NOT use a Nyloc nut on a heim joint, threaded upside down, and used as a jam nut against a bung.
A Nyloc nut is designed to be threaded onto a bolt with the Nylon facing away from the bolt. If you're looking for jam nuts for a heim joint, then you would use standard jam nuts, not Nylocs. If you're still having issues with standard jam nuts loosening up, then you could use a bit of blue Loctite.
This six point steel hex nut has fine thread and silver Zinc plating.
A Nyloc nut is designed to be threaded onto a bolt with the Nylon facing away from the bolt. If you're looking for jam nuts for a heim joint, then you would use standard jam nuts, not Nylocs. If you're still having issues with standard jam nuts loosening up, then you could use a bit of blue Loctite.
This six point steel hex nut has fine thread and silver Zinc plating.
Related Parts
7/8" ID Link Pin Shims For Adjusting The Camber On King Kong Link Pin Front Beams Set Of 40
In Stock
Price: $23.99
Heat Treated Alloy Heavy Duty 7/8" King Kong Link Pin Set For Aftermarket Front Trailing Arms
In Stock
Price: $189.99
Revlock Race Supplies Red Sure-Lock Nut, Bolt or Fastener Tamper Detection Paint 30ml Bottle
In Stock
Price: $12.00
Stepped Weld Washer 3/4" Bolt Hole 1/4" Tall Step For Reinforcing 1/4" Thick Plate
In Stock
Price: $4.99
