All German Motorsports 20" Travel Scissor Jack With Swivel Head 5-1/8" Collapsed To 26-1/2" Extended

The jack includes a drill or screw gun 19mm adapter socket and a 19mm reversible hand ratchet. This jack was not designed for use with an impact wrench. DO NOT USE AN IMPACT GUN ON THIS JACK! Behind the 19mm nut that you use to raise or lower the jack is a thrust bearing. Impact guns will destroy that bearing. See photo below.

The urethane pad on top swivels and will rest underneath a tube up to 1-1/2" in diameter, pinch weld or the flat surface of your vehicle. The pad can be removed. Underneath it is a 1-1/8" double sided Versa Pin. Some people weld tubing to the bottom of the chassis as "cups" for the jack to index into.

AGM's screw jack mounting kit (sold separately) will fit this scissor jack. Both jacks share the same 7-1/4" size bottom foot. You won't use the cup that is included in that kit but you do need to brace the top of this jack when mounting it in your vehicle. If you rely only on the bottom foot holder, the vibration from the vehicle will cause the jack to expand.