Bel-Ray 301082150255 Specialty Molylube Anti-Seize Compound 14.1oz Caulking Tube
Sold individually - but also available in boxes of 10 tubes
Estimate Shipping
Price: $58.99
234 In Stock
Sold As:
1 Tube of Anti-Seize
Part Number: CHE4601
MFG Number:
301082150255
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Bel-Ray 301082150251 NLGI 2 anti-seize is commonly mixed with Swepco 101 NLGI 2 Moly CV joint grease in the offroad racing industry. A non-melting, organoclay grease with 40% of molybdenum disulfide and graphite lubricating solids. It has a phenomenal capacity for preventing seizing and galling at assembly pressures in excess of 70 mPa (10,000 PSI). It is impervious to water and is unaffected by most acids and alkali. Under limited static conditions, the additive, moly and graphite lubricating solids in Molylube Anti-Seize Compound will provide exceptional protection at temperatures of -184°C to 399°C (-300°F to 750°F).
Offroad racing in CV joints
Cutting and tapping
Plug valves
Splines
Screw threads: nuts, bolts and studs
Assembly lubricant
Cams
Couplings
Ways and sliding surfaces
Pipe threads
Oversized pins
Die set leader pins
Contains a high percentage of moly and graphite
Works well at extremely high and low temperatures
Extreme pressure and anti-wear properties
Provides long term protection against galling, seizing and fretting. Fewer rejections at assembly
Excellent lubricant
Lower unit assembly costs
Water/acid/alkali resistant
Resists softening and washout
Superior adhesion to metal
Non-melting thickener and lubricating solids
Wide temperature range applications
APPLICATIONS
FEATURES AND BENEFITS
PDS PRODUCT DATA SHEET TYPICAL PROPERTIES:
-
Product No.: 301082
- @ 40°C, cSt: 482
- @ 100°C, cSt: 31.4
- Scar Diameter, mm 0.59
- Coefficient of Friction 0.061
- °C: -184 to 399
- (°F) (-300 to 750)
Old Product No.: 67700CC
NLGI Grade: 2
Penetration, worked (60 strokes), ASTM D217 mm/10: 280
Thickener Type: Organo-clay
Viscosity (Base Fluid), ASTM D445
Lubricating Solids Type: MoS2 & Graphite
Lubricating Solids, weight %: ~ 40
4-Ball EP Test, ASTM D2596 Weld Load, kg: 500
4-Ball Wear Test, ASTM D2266, 40 kg Load, 1 hr, 75°C
Coefficient of Friction, ISO 16047: 0.126
Rust Protection, ASTM D1743, rating: Pass
Useful Temperature Range*
