Eibach Torsion Release Bearing For 2.5" Diameter Bilstein, King, Sway-A-Way Or Fox Coil Over Shocks
Estimate Shipping
Price: $50.00
12 In Stock
Sold As:
1 Torsion Release Bearing With 2 Bearing Races
Part Number: ERSTRB300
MFG Number:
TRB300
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Makes preloading your shocks a breeze. Works on 2.5 Fox, King or Sway-A-Way shocks with both King or Eibach springs. As the spring is compressed it twist like a cork screw. This is called a torsional load. This bearing allows your spring to freely twist as the spring expands and contracts on your shock.
Can be used on the top spring preload nut, the bottom spring perch, or the spring divider. The bearing and washers are about 1/8" thick total.
Note: If you want to run these bearings on King's Prerunner Series spring dividers, you'll have to shave off some material on the divider. The Prerunner Series is a little bit too large to fit through the bearing. Pure Race series isn't a problem.
Can be used on the top spring preload nut, the bottom spring perch, or the spring divider. The bearing and washers are about 1/8" thick total.
Note: If you want to run these bearings on King's Prerunner Series spring dividers, you'll have to shave off some material on the divider. The Prerunner Series is a little bit too large to fit through the bearing. Pure Race series isn't a problem.
