EMPI 86-5833 Narrow CV Joint Axle Boot Or Hose Clamp 7mm Wide For Porsche 930 Porsche 934 Axle Boots
Estimate Shipping
Price: $0.99
16 In Stock
Sold As:
1 Clamp
Part Number: MRB8658331
MFG Number:
86-5833-0 *See note below
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
86-5833-0 is EMPI's part number for a 10 piece bag, however we sell them individually under part number 86-5833-1
These super narrow stainless clamps from EMPI fit both Porsche 930 or Porsche 934 CV boots. This clamp is for the small end of the boot that rides on the axle.
You'll put the three hooks from one end of the clamp into the openings on the other end of the clamp, then squeeze down on the square part of the clamp with a set of end snip pliers. You can use those same pliers to cut all the way through the square part of the clamp to release it, which makes it super convenient when you're in a hurry during a race.
They also work on AN -16 or AN -20 Fragola, Parker and XRP push lock hoses.
These super narrow stainless clamps from EMPI fit both Porsche 930 or Porsche 934 CV boots. This clamp is for the small end of the boot that rides on the axle.
You'll put the three hooks from one end of the clamp into the openings on the other end of the clamp, then squeeze down on the square part of the clamp with a set of end snip pliers. You can use those same pliers to cut all the way through the square part of the clamp to release it, which makes it super convenient when you're in a hurry during a race.
They also work on AN -16 or AN -20 Fragola, Parker and XRP push lock hoses.
-
Specs:
- Clamp min diameter 1"
- Clamp max diameter 2"
