Foddrill 2-1/2" Lift Left Side 0d Camber Dbl Shear King Kong Snout Spindle For Heim Joint 1-3/4" KP
Price: $1,597.50
1 In Stock
Sold As:
1 Spindle
Part Number: FOD112LD113D
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Designed to give you extra ground clearance. You can use these spindles with either 5/8" (18mm) link pins or 7/8" link pins depending on which bushings you purchase. However, if you're buying the larger 1-3/4" king pin spindles with King Kong snouts, you normally run the larger 7/8" link pins. Bushings and pins are listed below.
Features:
Extra ground clearance
Uses standard 18mm - 1.5 VW style spindle nuts
Foddrill's heavy duty 1-3/4" king pin
Double shear heim joint pocket
Uses a 5/8" bolt for heim joint tie rod ends
Zero degree camber
Note: Normally you run the spacer below the heim joint.
Extra ground clearance
Uses standard 18mm - 1.5 VW style spindle nuts
Foddrill's heavy duty 1-3/4" king pin
Double shear heim joint pocket
Uses a 5/8" bolt for heim joint tie rod ends
Zero degree camber
Note: Normally you run the spacer below the heim joint.
Related Parts
Foddrill Motorsport's spindles are available tapered for International tie rod ends, for a 5/8" bolt for a heim joint, or double shear for a 5/8" bolt for a heim joint. Below is a list of their part numbers. For example if you search for FOD101 you'll get the 3 variations of that spindle.
