Foddrill Billet 2-1/2" Lift Left Side 2d Camber Dbl Shear King Kong Snout Spindle With 1-3/4" KP
Price: $1,693.00
1 In Stock
Sold As:
1 Spindle
Part Number: FOD138LD113D
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Designed to give you extra ground clearance. The latest in off-road racing technology from Foddrill Motorsports. The backing plate and spindle snout are machined out of one piece of billet. On a normal spindle the snout is welded to the backing plate creating a weak point for cracks.
Features:
One piece billet snout is machined into backing plate
Extra ground clearance
Uses standard 18mm - 1.5 VW style spindle nuts
Foddrill's heavy duty 1-3/4" king pin
Double shear heim joint pocket
Uses a 5/8" bolt for heim joint tie rod ends
Two degree negative camber
Note: Normally you run the spacer below the heim joint.
One piece billet snout is machined into backing plate
Extra ground clearance
Uses standard 18mm - 1.5 VW style spindle nuts
Foddrill's heavy duty 1-3/4" king pin
Double shear heim joint pocket
Uses a 5/8" bolt for heim joint tie rod ends
Two degree negative camber
Note: Normally you run the spacer below the heim joint.
Related Parts
Foddrill Motorsport's spindles are available tapered for International tie rod ends, for a 5/8" bolt for a heim joint, or double shear for a 5/8" bolt for a heim joint. Below is a list of their part numbers. For example if you search for FOD101 you'll get the 3 variations of that spindle.
