Foddrill Left Side 2d Camber Combo Link Snout Spindle For International Tie Rod End With 1-1/2" KP
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
You can use these spindles with either 5/8" (18mm) link pins or 7/8" link pins depending on which bushings you purchase. Bushings and pins are listed below.
Features:
Uses standard 18mm - 1.5 VW style spindle nuts
Foddrill's light weight 1-1/2" king pin
Tapered for International tie rod ends
Two degree negative camber
Features:
Uses standard 18mm - 1.5 VW style spindle nuts
Foddrill's light weight 1-1/2" king pin
Tapered for International tie rod ends
Two degree negative camber
Related Parts
Heat Treated Alloy Heavy Duty 5/8" Link Pin Set For Aftermarket Front Trailing Arms
In Stock
Price: $64.99
7/8" ID Link Pin Shims For Adjusting The Camber On King Kong Link Pin Front Beams Set Of 40
In Stock
Price: $23.99
Heat Treated Alloy Heavy Duty 7/8" King Kong Link Pin Set For Aftermarket Front Trailing Arms
In Stock
Price: $189.99
Foddrill Replacement 1-1/2" Diameter Beam Spindle King Pin For Combo Link Or King Kong Spindles
In Stock
Price: $139.99
Timken 07204 Outer Combo Link Spindle Bearing Race 52mm Outside Diameter Uses 07100 Bearing
In Stock
Price: $11.99
Timken 15244 Inner Combo Link Spindle Bearing Race 62mm Outside Diameter Uses 15123 Bearing
In Stock
Price: $28.99
SKF 17315 Combo Link Spindle Inner Bearing Seal 62mm Outside Diameter 45mm Inside Diameter
In Stock
Price: $13.99
Foddrill Motorsport's spindles are available tapered for International tie rod ends, for a 5/8" bolt for a heim joint, or double shear for a 5/8" bolt for a heim joint. Below is a list of their part numbers. For example if you search for FOD101 you'll get the 3 variations of that spindle.
