Fortin Racing Porsche 934 Or 935 Large Outer Leather CV Axle Boot For 5-1/4" Trans Side Boot Flanges
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
The appropriate flanges, clamps and CV Savers are sold separately and listed below.
Note: The mid-board floater hub side uses a larger diameter outer leather boot than the transmission side. The hub side uses a 5-1/2" diameter leather boot. The transmission side uses a 5-1/4" diameter leather boot. Both sides use the same rubber inner boot.
Note: EMPI's 86-9318-0 flange kit is NOT predrilled for AGM's CV savers. If you want to run CV savers you'll have to drill and tap the aluminum boot flange. The aluminum flange from Fortin Racing is predrilled for a CV saver.
Note: The mid-board floater hub side uses a larger diameter outer leather boot than the transmission side. The hub side uses a 5-1/2" diameter leather boot. The transmission side uses a 5-1/4" diameter leather boot. Both sides use the same rubber inner boot.
Note: EMPI's 86-9318-0 flange kit is NOT predrilled for AGM's CV savers. If you want to run CV savers you'll have to drill and tap the aluminum boot flange. The aluminum flange from Fortin Racing is predrilled for a CV saver.
