Fox 2.0" Piggy Back Or Rotating Reservoir Shock Body Cap For 5/8" Shaft Threaded Under For BOC Cup

Fox 2.0" Piggy Back Or Rotating Reservoir Shock Body Cap For 5/8" Shaft Threaded Under For BOC Cup
    Price: $39.90
    4 In Stock
    Sold As: 1 Shock Body Cap

    Part Number: FOX20606070

    MFG Number: 206-06-070


    Order this item to pickup at our Corona, CA store. You'll pay when you get here. You can pay by credit card, cash or PayPal and we'll contact you when this order is ready for pickup.


    California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

    Description

    How to replace a Fox Shock top cap
    If you're replacing this body cap, then it's a good idea to replace the body cap o-ring and the piggy back bridge or rotating reservoir ring o-rings.


    Use o-ring number: 029-03-130-A or 029-04-130 for the body cap
    Use o-ring number: 029-03-137-A or 029-04-137-A for the bridge/rotating ring

    206-06-070 This body cap is threaded underneath it for the allen bolt of the BOC cup. It is the same, regardless if you're building a 6-1/2", 8-1/2" or 10" stroke BOC shock.

    Fox's bottom-out control provides extra resistance against bottom-outs.

    As the shock is compressed, the secondary piston that threads onto your shock shaft above the rebound valving stack will enter the bottom-out cup in the final 25% of travel to produce up to 3000 lbs of additional damping force. This allows the shocks to be tuned to give improved small bump compliance in the upper portion of the stroke, while still maintaining the ability to absorb huge impacts effectively.

    Important Notes:


    • You MUST use a longer shock body. Because the shock body is longer to house the piston and cup, the overall eye-to-eye length of the shock will be longer than what you currently have.
    • You MUST check the shock shaft length. If the shaft is too long, it will destroy the cup and piston.
    • You can ONLY use 1 back-up washer. That is the 0.100" thick washer on top of the rebound valving stack just below the nut. The overall length of this is so crucial that if you use 2 back up washers (standard on a shock) then the overall length will be too long.
    Fox Shocks BOC Bottom Out Control Animation

    Related Parts

    Scroll Top