Fox Racing Air Shocks 2" Coil Over Body 9.35" Stroke 1-1/4" Shaft Emulsion Shock Without Reservoir
Nitrogen Pressure:Fox air shocks should be charged with NITROGEN ONLY. Nitrogen will not hold moisture, and expands less as temperatures increase. DO NOT fill your shocks with compressed air because this will introduce moisture to the shock causing internal corrosion.
Fox air shocks can be filled with 10psi to 500psi of Nitrogen. To calculate the spring force, multiply the PSI by 1.2. For example 200psi x 1.2 = 240 pounds of spring force. The nitrogen pressure is used to set the ride height.
Estimate Shipping
Price: $333.33
1 In Stock
Sold As:
1 Fox Coil-Over Air Shock
Part Number: FOX98002070
MFG Number:
980-02-070
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Invented by Bob Fox in 1974, air shocks offer infinite ride height settings with simple nitrogen gas pressure changes in addition to their compression and rebound damping adjustability.
Factory Series 980-02-070 Dimensions:
Setup For Dual Spring Rate
22" Maximum Combined Total Spring Length
Typically Customers Purchase 10" Top Spring and 12" Bottom Spring
2.0" Diameter
9.35" Travel
26.630" Extended
17.290" Collapsed
1.25" Shaft Diameter
Shaft Material: 4130 Hollow Chromoly
1.25" Mounting Width Between Tabs
Uses 1/2" Shock Bolts
40 Compression / 90 Rebound Standard Valving
Factory Series 980-02-070 Dimensions:
Setup For Dual Spring Rate
22" Maximum Combined Total Spring Length
Typically Customers Purchase 10" Top Spring and 12" Bottom Spring
2.0" Diameter
9.35" Travel
26.630" Extended
17.290" Collapsed
1.25" Shaft Diameter
Shaft Material: 4130 Hollow Chromoly
1.25" Mounting Width Between Tabs
Uses 1/2" Shock Bolts
40 Compression / 90 Rebound Standard Valving