Fox Racing Shocks Replacement 1" Dia. 15-9/16" Long Shaft For 10" Stroke Shock 1/2" x 1.8" Top Post
Estimate Shipping
Price: $138.00
Call or email for availability
Sold As:
1 Shock Shaft
Part Number: FOX22911000A
MFG Number:
229-11-000-A
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
It's important to realize that any Fox Shock 2.5" or greater, regardless of shaft diameter, all have 7/8" thread on the bottom. So for example, if you have a 7/8" shaft, 1" shaft, 1-1/8" shaft or 1-5/8" shaft, they all have 7/8" thread on the bottom. If you're using this shaft on a 3.0" coil over shock, you can use a 2.5" end loop with the adapter spring perches listed below, but the trade off is you have to use a smaller uniball than what normally comes on a 3" coil over shock.
-
Specs:
- Top post for the valve shim stack and piston is 1.8" long and 0.500" in diameter
- Uses 1/2"-20 Nut
- Bottom thread is 7/8"-14 long thread
- Total tip to tip length: 15.53"
- 17-4 Chrome Plated
A common question that we get is, "can any Fox 7/8" threaded eyelet be used on any Fox shock shaft?". It depends on the shaft and how deep the threads are on the eyelet. A Fox 2.0" shock and some 2.5" Performance Series shocks with a 7/8" shaft have a shorter thread on the shaft and the eyelet is threaded shallower. See the example of the thread length on this shaft photo.
You'll also have to consider the size of the uniball when switching between different 7/8" eyelets.
You'll also have to consider the size of the uniball when switching between different 7/8" eyelets.
