Fox Shocks 2.0" Shock 5/8" Shaft Reservoir Hose With 7/16" O-Ring To 1/8" NPT Pipe Thread - 18" Long

Older 2.0 Pro Series shocks that had the welded top on the shock body used 1/8" NPT pipe thread on the shock body. Some of those shocks had pipe thread on the shock body AND pipe thread on the reservoir. Some of them had pipe thread on the shock body but they had 7/16" ORB thread on the reservoir. So if you're repairing old 2.0 proseries shocks double check the reservoir thread. This hose is also used on current VW ball joint class 9 and class 11 shocks.

You can also use hydraulic cloth braided line and steel hose ends listed below and make any length hose that you need.

To make lines using cloth braided line you'll need:
• -4 Cloth braided hose sold per foot listed below
• -4 ORB to -4 Adapter fittings listed below
• 1/8" NPT to -4 Adapter fittings listed below
• -4 Steel hose ends listed below