Fox Shocks Replacement Schrader Air Valve Stem For Ford Gen 1 Raptor Or Shocks That Use 3/8-24 Thrd
Estimate Shipping
Price: $20.00
21 In Stock
Sold As:
1 Schrader Valve
Part Number: RPGRAPP0421
MFG Number:
RAPP0421-1
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Important Note: Before you buy these Schrader valve conversions, make sure you have enough clearance around the shock when it's on the vehicle to prevent the Schrader valve from getting knocked off by your suspension arms or shock mounts. Also make sure the rubber seal on the bottom of this valve will actually butt up against something. From the top of the 3/8" threads to the bottom tip of the valve is about 1/2" deep. A first generation raptor front end loop works just fine with this valve.
Some Fox Performance series shocks and also the first generation Ford Raptor use a 3/8"-24 fine thread allen screw covering a rubber Nitrille pellet that you stab with a needle to fill the nitrogen into the shock. Those shocks require an expensive 802-01-000 nitrogen filling tool that often bends and breaks. RPG Offroad's stainless steel Schrader valves are a perfect solution so you don't have to buy that expensive tool.
Fits: 2010 to 2014 Gen 1 OEM Ford Raptor Fox shocks. Also Performance Series shocks using 3/8"-24 allen screws, but note that it seals using a rubber o-ring at the bottom of the Schrader valve.
Fits: 2010 to 2014 Gen 1 OEM Ford Raptor Fox shocks. Also Performance Series shocks using 3/8"-24 allen screws, but note that it seals using a rubber o-ring at the bottom of the Schrader valve.