Fragola AN -3 Male To 1/8" NPT National Pipe Taper Blue Anodized Aluminum 90 Degree Fittings
Dimensions for pipe thread and AN fittings are at bottom of page
Estimate Shipping
Price: $8.31
48 In Stock
Sold As:
1 AN Thread to Pipe Thread Adapter Fitting
Part Number: FRA482203
MFG Number:
482203
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
These adapter fittings allow you to adapt AN #3 hose or line to NPT - National Pipe Tapered thread. Always remember that pipe thread fittings are measured INSIDE diameter not outside diameter of the threads. See diagram at bottom of this page.
Related Parts
Pipe Thread Dimensions:
1/16" NPT is 1/16" I.D. / 0.313 O.D.
1/8" NPT is 1/8" I.D. / 0.405" O.D.
1/4" NPT is 1/4" I.D. / 0.540" O.D.
3/8" NPT is 3/8" I.D. / 0.675" O.D.
1/2" NPT is 1/2" I.D. / 0.840" O.D.
3/4" NPT is 3/4" I.D. / 1.050" O.D.
1" NPT is 1" I.D. / 1.315" O.D.
1-1/4" NPT is 1-1/4" I.D. / 1.660" O.D.
1-1/2" NPT is 1-1/2" I.D. / 1.900" O.D.
2" NPT is 2" I.D. / 2.375" O.D.
1/16" NPT is 1/16" I.D. / 0.313 O.D.
1/8" NPT is 1/8" I.D. / 0.405" O.D.
1/4" NPT is 1/4" I.D. / 0.540" O.D.
3/8" NPT is 3/8" I.D. / 0.675" O.D.
1/2" NPT is 1/2" I.D. / 0.840" O.D.
3/4" NPT is 3/4" I.D. / 1.050" O.D.
1" NPT is 1" I.D. / 1.315" O.D.
1-1/4" NPT is 1-1/4" I.D. / 1.660" O.D.
1-1/2" NPT is 1-1/2" I.D. / 1.900" O.D.
2" NPT is 2" I.D. / 2.375" O.D.
AN Fitting Thread Dimensions:
AN #2 is 5/16"-24 thread
AN #3 is 3/8"-24 thread
AN #4 is 7/16"-20 thread
AN #6 is 9/16"-18 thread
AN #8 is 3/4"-16 thread
AN #10 is 7/8"-14 thread
AN #12 is 1-1/16"-12 thread
AN #16 is 1-5/16"-12 thread
AN #20 is 1-5/8"-12 thread
AN #24 is 1-7/8"-12 thread
AN #28 is 2-1/4"-12 thread
AN #32 is 2-1/2"-12 thread
AN #2 is 5/16"-24 thread
AN #3 is 3/8"-24 thread
AN #4 is 7/16"-20 thread
AN #6 is 9/16"-18 thread
AN #8 is 3/4"-16 thread
AN #10 is 7/8"-14 thread
AN #12 is 1-1/16"-12 thread
AN #16 is 1-5/16"-12 thread
AN #20 is 1-5/8"-12 thread
AN #24 is 1-7/8"-12 thread
AN #28 is 2-1/4"-12 thread
AN #32 is 2-1/2"-12 thread