Hall Designs Dust Cover For 4-1/2" MTM Redhead Female Double Dry Break Receivers For 10-32 Bolts

Note: Do NOT let the cover plate snap shut until you mount it! The mounting bracket will contact the cover and may crack the plastic. If your dry break is attached directly to a fuel cell, place the supplied o-rings into the countersunk holes on the dry break and install the cover plate on top of the o-rings.

One of the biggest problems in off-road racing is getting dirt, mud, sand, silt or rocks in your dry break receiver. Keep your dry break receiver clean! Simple spring loaded cover keeps a tight seal against fill plate. Once opened, the spring holds the cover open for refueling. Durable nylon construction with hardware.

Designed for the standard 4-1/2" Fuel Safe or MTM Inc. Redhead dual dry break receivers.

• Available for #10 or 1/4" bolt hole flange plates
• Reflective "Vent" sticker included
• Nylon cover and hinged bracket
• Viton seals
• Stainless steel roll pins and hinge pins
• Mounting bolts and nyloc lock nuts included