Howe Large Power Steering Control Valve 0.200 Torsion 13/16-36 Spline To Driver 3/4-48 To Rack

Howe Performance's high flow servo control valve for power steering. For use with rack and pinions such as Howe Performance, Fortin Racing, Power Steering Solutions and Sweet Manufacturing.

If you're trying to replace a servo already on your car/truck/vehicle, if you look carefully at the old servo, Howe always engraves the torsion bar size into the control valve next to . The thicker the torsion bar the stiffer your steering will feel. The thinner the torsion bar is, the softer/easier your steering will feel.

There are four fittings on the control valve. Each fitting has a letter engraved next to it. Note: The PDF instructions are for a Sweet valve that has smaller fittings than the Howe valve.

• P = AN #8 Fitting that comes from the power steering pump
• T = AN #10 Fitting that returns from the control valve back to the reservoir tank
• L = AN #8 Fitting that goes to left side of power steering ram
• R = AN #8 Fitting that goes to right side of power steering ram