Jamar Performance Pro-X Porsche 930 Rear Midboard Micro Stub Brake Kit 4 Piston Calipers 11-7/8" Rtr
Estimate Shipping
Price: $3,411.67
2 In Stock
Sold As:
1 Complete Disc Brake Kit
Part Number: JAMJ9200
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Jamar's complete disc brake hub kits include everything for both sides of the vehicle that you'll need, EXCEPT adapter fittings for whatever type of brake line you plan to use and lug nuts. The adapter fittings are listed below.
Future Upgrade Possibilities:
Later on, if you decide to upgrade from 930 to 934 you can simply change the stub axles. You won't have to purchase an entire new brake kit.
This kit is for a Midboard micro stub trailing arm plate. See below picture for reference.
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Rotors
Two 4 Piston Calipers With Pads
Two Hub Caps
Two 3.90" - 33 Spline Micro Stub Hub Bearing Assemblies
Two 33 Spline Stub Axles
Two Axle Nuts
Specs:
Bearings are for 3.90" index hole on trailing arm
Calipers are four piston with 1-5/8" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Rotors have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
Future Upgrade Possibilities:
Later on, if you decide to upgrade from 930 to 934 you can simply change the stub axles. You won't have to purchase an entire new brake kit.
This kit is for a Midboard micro stub trailing arm plate. See below picture for reference.
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Rotors
Two 4 Piston Calipers With Pads
Two Hub Caps
Two 3.90" - 33 Spline Micro Stub Hub Bearing Assemblies
Two 33 Spline Stub Axles
Two Axle Nuts
Specs:
Bearings are for 3.90" index hole on trailing arm
Calipers are four piston with 1-5/8" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Rotors have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)