Jamar Performance Pro-X Porsche 934 Outboard Floater Hub Brake Kit 6 Piston Calipers 12-1/4" Rotors

Note: Jamar no longer includes the hub socket wrench in this kit. You must buy it separately.

Jamar's complete disc brake hub kits include everything for both sides of the vehicle that you'll need, EXCEPT adapter fittings for whatever type of brake line you plan to use, lug nuts, CV joints and outer axle boots. The adapter fittings are listed below.

This kit is available with several different snout options allowing you to convert from a competitor's brake kit over to Jamar's. You'll need to measure the inside diameter of the trailing arm plate and count the amount of bolt holes that you have. See below picture for reference.

Future Upgrade Possibilities:
Later on, you can upgrade to the larger 14" diameter rotors and the larger six piston calipers.

Parts Required To Upgrade Outboard Floater Hub Kit

CAL610L Left Caliper

CAL610R Right Caliper

BTTB14MT Radial To Standard Caliper Brackets

9000ADR Rotor Adapter Plate

JAMDB9000OBFH14/L Left Rotor

JAMDB9000OBFH14/R Right Rotor

Specs:
Calipers are six piston with 1-1/2" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Hubs have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
proam pro am pro-am tatum motorsports fortin racing pme performance motorsports engineering midboard mid-board out-board summers brothers