Jamar Performance Pro-X Porsche 934 Rear Micro Stub Brake Kit With 4 Piston Calipers 11-3/8" Rotors
Estimate Shipping
Price: $3,627.33
2 In Stock
Sold As:
1 Complete Disc Brake Kit
Part Number: JAMJ9034300M
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Jamar's complete disc brake hub kits include everything for both sides of the vehicle that you'll need, EXCEPT adapter fittings for whatever type of brake line you plan to use and lug nuts. The adapter fittings are listed below.
Future Upgrade Possibilities:
Later on, if you decide to upgrade your arms to a 3.90" index hole, the kit can be upgraded simply by changing the bearing assembly.
This kit is for a STANDARD micro stub trailing arm plate (flat plate). See below picture for reference.
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Rotors
Two 4 Piston Calipers With Pads
Two Hub Caps
Two 3.60" - 33 Spline Micro Stub Hub Bearing Assemblies
Two 33 Spline Stub Axles
Two Axle Nuts
Specs:
Bearings are for 3.60" index hole on trailing arm
Calipers are four piston with 1-5/8" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Rotors have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
Future Upgrade Possibilities:
Later on, if you decide to upgrade your arms to a 3.90" index hole, the kit can be upgraded simply by changing the bearing assembly.
This kit is for a STANDARD micro stub trailing arm plate (flat plate). See below picture for reference.
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Rotors
Two 4 Piston Calipers With Pads
Two Hub Caps
Two 3.60" - 33 Spline Micro Stub Hub Bearing Assemblies
Two 33 Spline Stub Axles
Two Axle Nuts
Specs:
Bearings are for 3.60" index hole on trailing arm
Calipers are four piston with 1-5/8" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Rotors have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
