Kartek Off-Road Custom Made 4130 Chromoly Tie Rod For 1" Heim Joints And Rod Ends On Both Sides
We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.
American made using 1-1/4" x 0.250" wall Chromoly tubing at our Corona, CA location. Tie rods are made to order and are NOT REFUNDABLE!
Normally we tap one side left hand thread and the other side right hand thread. If you require both sides to be right hand thread then please put that in the notes above. BOTH ends of these tie rods are 1"-14 thread. Besides tie rods, they can be used as sway bar links, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, traction bars, or turn buckles.
Normally we tap one side left hand thread and the other side right hand thread. If you require both sides to be right hand thread then please put that in the notes above. BOTH ends of these tie rods are 1"-14 thread. Besides tie rods, they can be used as sway bar links, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, traction bars, or turn buckles.
