Kartek Off-Road Driver Side Tig Welded Heavy Duty A-Arm Combo Link Buggy Or Sand Rail Spindle
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
These TIG welded spindles with steering arms are available in Combo, King Kong, or 2" hollow snout sizes. Made from 4130 chromoly steel plate.
Combo link, short for combination, was designed many years ago by Kartek Off-Road. Combining the 3 bolt backing plate pattern from a VW ball joint spindle, the threads from VW King and Link Pin spindle and our own large diameter proprietary spindle shaft, combo link was born. Used for many years by Desert Dynamics, Desert Rat Buggies, Buggy Works and Toyz 4 Big Boyz.
Combo link, short for combination, was designed many years ago by Kartek Off-Road. Combining the 3 bolt backing plate pattern from a VW ball joint spindle, the threads from VW King and Link Pin spindle and our own large diameter proprietary spindle shaft, combo link was born. Used for many years by Desert Dynamics, Desert Rat Buggies, Buggy Works and Toyz 4 Big Boyz.
-
Notes:
- The gap for the upper heim, lower heim and tie rod heim ranges ranges from 1-3/4 to 1-7/8 because of warping from heat. Usually they're around 1-13/16" gap.
- Uses the same diameter 18mm-1.5 thread spindle nuts as King Kong and VW King And Link Pin
- Uses the same caliper bracket as a King Kong or VW ball joint spindle
- Driver side spindle is left hand reverse thread
- Disc Brake Kits are NOT interchangeable between Combo Link and King Kong because of the bearing diameters
- Seal Diameter: 44.5mm
- Inner Bearing Spindle Diameter: 32mm
- Outer Bearing Spindle Diameter: 25.5mm
