Kartek Off-Road Passenger Side 2-1/2" Hollow Bolt-On Spindle Snout 12 Blt 3-3/4" Ptrn 3-1/8" Spindle
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Right hand thread spindle for use with our 14 degree CL6414D or 16 degree CL6416D billet clevis. 2.365" major diameter on the threads. Requires pinch style locking spindle nut part number CMI25NR. A conventional N12 nut will not fit because it is for a 2.360" major.
When using our 6-1/4" diameter 14 degree CL6414D or 16 degree CL6416D billet clevis, use the twelve point 1" long bolts listed below.
Note: These snouts DO NOT work with Jamar's J7000 trophy truck front hub kit. That kit requires a 2-15/16" to 3" maximum spindle length (figure A not including the threads).
When using our 6-1/4" diameter 14 degree CL6414D or 16 degree CL6416D billet clevis, use the twelve point 1" long bolts listed below.
Note: These snouts DO NOT work with Jamar's J7000 trophy truck front hub kit. That kit requires a 2-15/16" to 3" maximum spindle length (figure A not including the threads).
Dimensions:
A Spindle length 3-1/8"
B Shoulder length 7/8"
C Flange length 1/2"
D Back shoulder length 1/4"
E Back shoulder diameter 2-7/8" nominal (2.860")
F Flange diameter 4-1/2" nominal (4.450")
G Shoulder diameter 3"
H Spindle diameter 2-1/2"
I Spindle nut diameter 3-3/4" nominal (3.700")
Twelve bolt 3-3/4" pattern
Uses 3/8" diameter 12 point bolts
18 Threads per inch
2.365" Major diameter on the threads