Kartek Off-Road Racing Custom Made 100% Machined Tie Rod For 1-1/4" Rod Ends On Both Sides
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Note: We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.
We do NOT make these tie rods in house. They are made by a separate machine shop. Standard lead time 5-6 weeks. Please download this form and fill it out. You can email or fax it to us. The form must be completed before the tie rods are made.
CLICK HERE TO DOWNLOAD ORDER FORM
We do NOT make these tie rods in house. They are made by a separate machine shop. Standard lead time 5-6 weeks. Please download this form and fill it out. You can email or fax it to us. The form must be completed before the tie rods are made.
CLICK HERE TO DOWNLOAD ORDER FORM
American made 100% machined aluminum. When only the best will do. Tie rods are made to order and are NOT REFUNDABLE!
Normally we tap one end left hand thread and the other end right hand thread. If you require both ends to be right hand thread then please put that in the notes above. BOTH ends of these tie rods are 1-1/4"-12 thread. Besides tie rods, they can be used as sway bar links, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, or traction bars.
Normally we tap one end left hand thread and the other end right hand thread. If you require both ends to be right hand thread then please put that in the notes above. BOTH ends of these tie rods are 1-1/4"-12 thread. Besides tie rods, they can be used as sway bar links, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, or traction bars.
