Latest Rage 51104 Type 2 Bus Rubber CV Axle Boot For 86-9305 Single Boot Flanges
Estimate Shipping
Price: $10.99
4 In Stock
Sold As:
1 Axle Boot
Part Number: KTK9304
MFG Number:
51104
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Use the 60mm to 80mm clamp listed below. The 51104 Latest Rage boot has a smaller inside diameter on the axle end of the boot and the lip for your hose clamp or zip tie is slightly wider than the 86-9304-0 EMPI cross reference for the same boot. Either brand of boot requires EMPI's 86-9305-0 flange.
Either brand of boot will work perfectly fine. For reference, the average Sway-A-Way axle is about 0.910" thick on the smooth portion of the axle. So an EMPI 1.00" ID boot is a bit sloppy without a clamp on the end of it and the Latest Rage 0.875" ID boot seals tight on the axle without a clamp on the end of it.
-
Comparison
- EMPI's opening is 1" on the axle side of the boot and the lip is 3/16" wide for your hose clamp
- Latest Rage's opening is 7/8" on the axle side of the boot and the lip is 1/4" wide for your hose clamp
Either brand of boot will work perfectly fine. For reference, the average Sway-A-Way axle is about 0.910" thick on the smooth portion of the axle. So an EMPI 1.00" ID boot is a bit sloppy without a clamp on the end of it and the Latest Rage 0.875" ID boot seals tight on the axle without a clamp on the end of it.