MTA 0100665/21 O-Ring Sealed Relay Box For Holding 4 Standard 5 Prong Relays Does Not Include Relays
Estimate Shipping
Price: $49.99
2 In Stock
Sold As:
1 Relay Box Without Relays
Part Number: HELH84988007
MFG Number:
0100665/21
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Important Note: Always stop and look at the relay to note the positions of each number on each blade ! ! For example Hella's black 40 amp relays have their #30 constant power in a different position than the Hella blue fused relays. The blue fused relays will not fit in this box.
This box will fit the single circuit 4 prong relay 4RA 933.332-101 or the dual circuit 4RA 933.332-181 if you cut the tab off and need the extra 87A prong.
This little box is the cleanest way to setup four relays. It includes an o-ring sealed clear cover and the necessary 1/4" female terminals that snap into the bottom of the box. The box is about 5 inches long and 2 inches wide (not including the mounting tabs).
This box will fit the single circuit 4 prong relay 4RA 933.332-101 or the dual circuit 4RA 933.332-181 if you cut the tab off and need the extra 87A prong.
This little box is the cleanest way to setup four relays. It includes an o-ring sealed clear cover and the necessary 1/4" female terminals that snap into the bottom of the box. The box is about 5 inches long and 2 inches wide (not including the mounting tabs).
Wiring (look at the numbers on the relay NOT the box):
- #86 wire is switched power on. The trigger wire from a toggle switch or thermostat
- #87 wire goes to your lights, starter solenoid, fuel pump, or radiator fans
- #87a wire is normally not used. When the toggle switch is turned OFF to 86 the 87a then becomes ON
- #30 wire is for 12v constant power. Obviously run a fuse or circuit breaker on this wire
- #85 is a ground wire
