Replacement Rubber Boot For Our 641022SU End Load Rack And Pinions 1-3/4" Opening On Both Ends

Replacement Rubber Boot For Our 641022SU End Load Rack And Pinions 1-3/4" Opening On Both Ends
Rough Shipping Estimate
Estimate Shipping
Price: $12.99
Call or email for availability
Sold As: 1 Boot

Part Number: SAC642020AB



Order this item to pickup at our Corona, CA store. You'll pay when you get here. You can pay by credit card, cash or PayPal and we'll contact you when this order is ready for pickup.


California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

Use KTK60414200 bushing to reduce the diameter from 1-3/4" to 1" on the tie rod side of this boot. You'll clamp the boot to the delrin bushing, but you'll allow the delrin bushing to glide up and down the tie rod to prevent the boot from tearing.

kartek off-road end load steering rack and pinion for sandrails and buggies boot setup

Related Parts

Kartek Off-Road Custom Made 4130 Chromoly Tie Rods For 3/4" Heim Joints And Rod Ends On Both Sides

Kartek Off-Road Custom Made 4130 Chromoly Tie Rods For 3/4" Heim Joints And Rod Ends On Both Sides
In Stock Price: $149.99
More Info

Kartek Off-Road HD Custom Made 4130 Chromoly Tie Rods For 3/4" Heim Joints And Rod Ends On Both Side

Kartek Off-Road HD Custom Made 4130 Chromoly Tie Rods For 3/4" Heim Joints And Rod Ends On Both Side
In Stock Price: $199.99
More Info

EMPI 86-5780 Narrow CV Joint Axle Boot Clamps 7mm Wide 10" Long Requires 86-5792 Clamp Banding Tool

EMPI 86-5780 Narrow CV Joint Axle Boot Clamps 7mm Wide 10" Long Requires 86-5792 Clamp Banding Tool
In Stock Price: $0.74
More Info

Black Delrin Pivot Bushing 1" Inside Diameter 1-3/4" Outside Diameter 1-1/4" Total Length

Black Delrin Pivot Bushing 1" Inside Diameter 1-3/4" Outside Diameter 1-1/4" Total Length
In Stock Price: $17.99
More Info

Kartek Offroad 1.5:1 Ratio Hard Anodized End Load Rack And Pinion For A-Arm Sand Cars

Kartek Offroad 1.5:1 Ratio Hard Anodized End Load Rack And Pinion For A-Arm Sand Cars
In Stock Price: $419.99
More Info

Daystar Black 2" To 2-1/4" Shock Body Dia Protective Boot 10" Long 1-1/4" to 1-1/2" End Loop Dia

Daystar Black 2" To 2-1/4" Shock Body Dia Protective Boot 10" Long 1-1/4" to 1-1/2" End Loop Dia
In Stock Price: $7.99
More Info

Black Delrin Pivot Bushing 3/4" Inside Diameter 1-1/4" Outside Diameter 1-1/8" Total Length

Black Delrin Pivot Bushing 3/4" Inside Diameter 1-1/4" Outside Diameter 1-1/8" Total Length
In Stock Price: $13.99
More Info
Scroll Top