S&B Filters 76-6001 Particle Separator Remote Dual Helmet Fresh Air Blower Kit With Hoses And Clamps

Note: S&B Filter's helmet hoses are 1-5/8" on the blower side and 1-1/4" on the helmet side. If you want to use industry standard 1-1/4" x 1-1/4" hoses, for example if you plan to use Maglock Magnetic fresh air hose ends, you'll have to buy reducers for the 1-5/8" blower outlets.

A 1-1/2" x 1-1/4" would work but it's tight. A 1-5/8" x 1-1/4" coupler, like the one HPS Performance Products sells would work a lot better.


The blower has a variable speed knob on it with two fans (the off-on rocker switch mounts to your dash). The primary fan draws air into the blower, while the bottom secondary fan blows all the silt, sand and dust downward out of the unit. The 76-6000 and 76-6001 are the same blower. The only difference is that the 76-6000 is a replacement blower only and the 76-6001 is a complete kit with hoses and clamps.