Spal 30107090 Plus Series 16" Curved Blade Brushless Puller Fan Drop In Mount Sits Inside Shroud

Spal SBL fans have motors sealed to IP68 and IP6K9K water resistant and dust proof standards. Brushless fans have a variable speed. As the radiator gets hotter, the fan spins faster. At cooler temperatures, the fan isn't spinning as fast. This is controlled by Spal's variable speed temperature sensors. The CFM rating that Spal provides for this fan is measured at its peak speed when the cooling system is at its hottest temperature or if you use the blue wire with an override switch.

• Thickness/Depth: 3.10"
• Airflow: 2053 CFM
• Motor: 300w

The difference between the 30107090 and the 30107101 is the amperage draw, wattage, depth and CFM:

• 30107090 is rated at 300w roughly 25 amp max draw on a 12v system (300w ÷ 12v = 25a) at 2053 CFM
• 30107101 is rated at 500w roughly 41.67 amp max draw on a 12v system (500w ÷ 12v = 41.67a) at 2430 CFM

ONE OF THESE TEMPERATURE SENSORS
• SBL-TS-165P: 140°F to 165°F 12VDC temperature sensor for Plus Series
• SBL-TS-185P: 165°F to 185°F 12VDC temperature sensor for Plus Series
• SBL-TS-195P: 175°F to 195°F 12VDC temperature sensor for Plus Series
• SBL-TS-215P: 190°F to 215°F 12VDC temperature sensor for Plus Series

BOTH OF THESE HARNESSES
• SBL-YAZ-PT10 Harness with a Yazaki connector on one end plugs in to the fan's connector. This is required for EACH brushless fan used.
• SBL-TS-HARN Harness to attach the SBL-TS** temperature sensors to the SBL-YAZ-PT10 brushless fan connector.

When using multiple fans, only one sensor and one SBL-TS-HARN is needed. Up to 12 fans can be ran off of one sensor. You will need one SBL-YAZ-PT10 FOR EACH FAN.