Spal 30107125 Plus Series 15" Curved Blade Brushless Puller Fan Surface Mount Sits On Top Of Shroud

Spal SBL fans have motors sealed to IP68 and IP6K9K water resistant and dust proof standards. Brushless fans have a variable speed. As the radiator gets hotter, the fan spins faster. At cooler temperatures, the fan isn't spinning as fast. This is controlled by Spal's variable speed temperature sensors. The CFM rating that Spal provides for this fan is measured at its peak speed when the cooling system is at its hottest temperature or if you use the blue wire with an override switch.

• Thickness/Depth: 3.20"
• Airflow: 1972 CFM
• Motor: 300w

The difference between the 30107125 and the 30107328 is the amperage draw, wattage, depth and CFM:

• 30107125 is rated at 300w roughly 25 amp max draw on a 12v system (300w ÷ 12v = 25a) at 1972 CFM
• 30107328 is rated at 500w roughly 41.67 amp max draw on a 12v system (500w ÷ 12v = 41.67a) at 2432 CFM

The 15.2" (30107125) flush mount fan uses the same exact bolt pattern as the current medium profile and high performance 16" brushed fans so it can used as an upgrade to any existing radiator.

ONE OF THESE TEMPERATURE SENSORS
• SBL-TS-165P: 140°F to 165°F 12VDC temperature sensor for Plus Series
• SBL-TS-185P: 165°F to 185°F 12VDC temperature sensor for Plus Series
• SBL-TS-195P: 175°F to 195°F 12VDC temperature sensor for Plus Series
• SBL-TS-215P: 190°F to 215°F 12VDC temperature sensor for Plus Series

BOTH OF THESE HARNESSES
• SBL-YAZ-PT10 Harness with a Yazaki connector on one end plugs in to the fan's connector. This is required for EACH brushless fan used.
• SBL-TS-HARN Harness to attach the SBL-TS** temperature sensors to the SBL-YAZ-PT10 brushless fan connector.

When using multiple fans, only one sensor and one SBL-TS-HARN is needed. Up to 12 fans can be ran off of one sensor. You will need one SBL-YAZ-PT10 FOR EACH FAN.