PRP's new impact gun bag is a compact design that can be hidden away by strapping it between your car's roll bars. The bag features a molded foam cutout that will fit most impacts along with a socket, battery and any extra accessories along with straps to keep the impact secure in the bag.

With the growing popularity of Trophy Karts for recreational use and for CORR's new Trophy Kart Class, KARTEK is now an authorized dealer of Trophy Karts and Trophy Kart parts. Common replaceable parts, upgrade kits and performance parts are now available and on display in our showroom.

Call us for more information on what is available or click here for a sample of what is available.

This specialty wrench is used to tighten and loosen the rear truck hubs manufactured by ProAm. Two versions are available; one for the Trophy Truck series and another for the Pro series. Call ask one of our sales staff for more information.

Kreger Big Wheel Kit allows for a Craftsman jack to be easily rolled under a car on hard pack and soft dirt. The tall wheels also raise the overall height of the jack to eliminate the need jack blocks for long travel cars.

The kit simply bolts on to the jack without needing any fabrication work.

MasterCraft restraint systems are available in both 2" and 3" versions for competitive and recreational use. The belts can be ordered as either a dual system were the shoulder straps and individually mounted or a Y setup where both straps have a single mounting point. The mounting points are available as either bolt-on, snap-on, or wrap around. Shoulder pads are available with any combination.

All 3" driver restraints are SFI-16-1 approved. Most sanctioning bodies require all belts/systems be re-webbed or replaced two years after the date stamped on the SFI tag. This is done for your safety.

Itector's billet aluminum iPod cases provides for a secure place to mount your iPod for your car, buggy, truck, quad or UTV.

The cases are available for 1st, 2nd & 3rd Generation Nanos, 30 GB pods, iTouch pods, and both 60 & 80 GB video pods. The cases are available as polished, black, blue and pink.

Mounts are available as a belt clip, stick on, bolt on, handle bar clamp, and Rhino steering column mount.

ProAm's spindle nut sockets allow for an easy installation and removal of the specialized spindle nuts that are used by the 2-1/2" spindle snouts that are common with ProAm's racing hubs, such as the Pro and Trophy Truck series hubs.

Sockets for both the round and square key nuts are available.

RPS Quick Release Fire Extinguisher mount is an universal mount that allows for three different mounting options. The mount can be clamped on, bolted on or welded on to any roll bar. The mount is made from mild steel and is powder coated red. Hardware is not included.

Howe's inline oil coolers are the perfect solution for reducing power steering fluid temperatures due to the internal cooling fin design. The coolers are a simple install when using Howe's mounting brackets. The coolers are threaded for AN fittings.

There are two inline coolers available; the standard 2" x 7" which is used for most applications, and the larger 3" x 12" cooler that is used on more demanding systems such as those used by Trophy Trucks.

Howe's cooler brackets are machined from billet aluminum and are available for both the 2" and 3" inline coolers.

New from MasterCraft is their 3G suspension seat with the R3 cutout. This new cutout allows racers to have the comfort and support of the race proven 3G suspension seat without having the R3 head and neck brace interfering with the seats lateral support, or compromising the brace's effectiveness.

USI's SFI 45.1 licensed molded roll bar pads are the highest rated impact pads available on the market, which are now mandated by CORR. Molded from urethane foam, these smooth pads are easy to cut to length and form into curves. These pads are easy to install even in tight locations thanks to the use of the included PSA tape or spray on 3M 77 adhesive.

The pads are available in 1 3/4" and 1 1/2" sizes.

New from ProAm Racing Products is their Billet Aluminum 5-Speed Shifter for Mendeola's MD5 transaxles. Unlike many current 5 speed H pattern shifters, the shifter was designed to meet the demands for not only off roading, but also for the MD5's non-sequential design.

Like ProAm's 4 speed shifters, the shifter features a one-handed reverse lockout, bolt-in design, and replaceable Olite bushings for smoother shifting.

New from fox is their 2.5" coil-overs for the 03+ 4Runner, 05+ Tacoma, and 07+ FJ Cruiser. These shocks feature a hefty 2.5" body and a remote reservoir for more fluid capacity to eliminate fading. 

These coil-overs are easy to install and come fully-assembled with all the hardware included, and the sway bar relocation plates.

These shocks are available with either a blue or black anodized finish. When ordering specify if your application is for stock arms or an aftermarket long travel kit. Rear 2.0" Pro Series Shocks are optional.

Fox's 2.0" Pro Series Piggy Back shocks are ideal for the rear for the 03+ 4Runner, 05+ Tacoma, and 07+ FJ Cruiser when used with the new 2.5" coil-overs. These shocks feature a 2.0" body, a piggy back reservoir, and 8 1/2" inches of travel.

These shocks are available with either a blue or black anodized finish.

Total Chaos Fabrication now offers 3.5" fabricated lift spindles for the 2wd 05+ Tacoma, 03+ 4Runner, and 07+ FJ. The kit adds increase ground clearance and superior strength over the stock cast Toyota spindles. These spindles can be installed with existing aftermarket mid travel upper control arms, coil over shock packages and stock control arms.

The kit includes:
-Two 3.5" fabricated lift spindles
-D.O.T. stainless steel braided brake lines
-Mounting hardware

Coleman's window net mount kit is a spring loaded design that enables a driver and co-driver to quickly latch and unlatch the net. The kit is 22" & 26" wide and can use most window nets that feature a loop design such as our line of Crow window nets.